Conexant AccessRunner CX82310, Руководство пользователя

Страница: 38 / 115

For the multiple PPP sessions, please go to PPP Configuration page (Section 6.3).
• •
Service Name: The service name of PPP is required by some ISPs. If the ISP does not provide the Service Name,
please leave it blank.
• •
Disconnect Timeout: The Disconnect Timeout allows the user to set the specific period of time to disconnect from the
ISP. The default is 0, which means never disconnect from the ISP.
• •
MRU: Maximum Receive Unit indicates the peer of PPP connection the maximum size of the PPP information field this
device can be received. The default value is 1492 and is used in the beginning of the PPP negotiation. In the normal
negotiation, the peer will accept this MRU and will not send packet with information field larger than this value.
• •
MTU: Maximum Transmission Unit indicates the network stack of any packet is larger than this value will be fragmented
before the transmission. During the PPP negotiation, the peer of the PPP connection will indicates its MRU and will be
accepted. The actual MTU of the PPP connection will be set to the smaller one of MTU and the peers MRU. The default is
value 1492.
• •
MSS: Maximum Segment Size is the largest size of data that TCP will send in a single IP packet. When a connection is
established between a LAN client and a host in the WAN side, the LAN client and the WAN host will indicate their MSS during
the TCP connection handshake. The default value is 1432.
• •
Automatic Reconnect: When it is checked, it will maintain the PPP connection all the time. If the ISP shut down the PPP
connection, it will automatically reconnect PPP session.
• •
Authentication: When AUTO option is chosen, the PAP mode will run first then CHAP.
• •
Host name: Required by some ISPs. If the ISP does not provide the Host name, please leave it blank.
IGMP