background image

 

                                          EDGE router ER75i 

Configuration setting 

Monitoring of status, configuration and administration of the router 
can be performed by means of the web interface which is 
available after entering the IP address of the modem in the web 
browser. The default IP address of the modem is 192.168.1.1. 
Configuration may be performed only by the user "root" with initial 
password "root". 

After green LED diode start blinking it is possible restore initial 
setting of the router by pressing buttons RST, whereby it is 
fulfilment restoration configuration and reset (green LED will be 
on). 

Directions to configuration, management, GPRS connection over 
USB installation and other information you find in User Guide 
(in format PDF) on enclosed CD. 
 

Keeping about customers 

Up to date information about product are on website: 

http://www.conel.cz/

 

 

Conel company following declared, that the modem narrated 
in this user’s guide fit all basic demands of directive 1999/5/EC 
(R&TTE).  
 

Declaration about consistency was issue and is 
possible   get it at producer.

 

 

 

 

 

 

Conel s.r.o., Sokolská 71, 562 04 Ústí nad Orlicí, 

Č

eská republika 

Issue in CZ

, 06/2009

 

 

Содержание EDGE ER75i






Отзывы: