36
5
REQUIREMENTS FOR THE PLACE OF INSTALLATION
/
The ambient temperature must not exceed 30 °C (86 °F)! At higher temperatures or direct sun radia-
tion the material can be damaged and the filter hood can even break.
/
In order to be able to safely discharge the wastewater (backwashing) in operation and in case of any
defects that occur in the system, precise compliance with the details given in the chapter 6 “INSTAL-
LATION” is necessary!
If the wastewater (backwashing) cannot be safely and completely discharged, the house and installa-
tions can be damaged by water.
/
The room where the unit is installed must be dry and frost free. Unauthorised persons must not have
access to the domestic water station.
/
The domestic water station must not be exposed to strong shocks.
/
A shutoff valve must be installed upstream of the domestic water station! Thus, the water supply can
be interrupted during installation, maintenance, repair and malfunction of the domestic water station.
Floodings and serious water damage to house installations can be avoided this way.
/
The unit can be installed in all standard drinking water pipes.
/
It is not permitted to install the domestic water station upstream of the water meter!
To ensure trouble-free operation, the requirements listed below must be adhered
to:
Always install the domestic water station in a vertical position! Failure to observe
this can cause uncontrolled backwashing water to escape and can result in water
damage.
Содержание CLEAR 2.0
Страница 15: ...15 Abb 6 Ableitungsmöglichkeiten für das Rückspülwasser I min 15 l II min 40 mm III IV V min 250 mm min 250 mm ...
Страница 41: ...41 Fig 6 Backwash water discharge options I min 15 l II min 40 mm III IV V min 250 mm min 250 mm ...
Страница 67: ...67 Rys 6 Możliwości odprowadzania popłuczyn I min 15 l II min 40 mm III IV V min 250 mm min 250 mm ...
