CGU 04i DESCRIPTION
28
2.10. CGU 04i settings
Configuration and service SW RADWIN is designed for the module setup (reference
[3]
). The software is created for MS WINDOWS 95/98/ME/2000/XP platforms. Service cable
is designed for CGU 04i connection. After service cable (data cable KD-2 and jump service
SEPRO) is connected to any serial user interface RS232 and service SW runs on a connected
PC it is possible to execute not just all the needed CGU settings, but service interventions
in the data network as well. The basic setting of the radio modem is in
[5]
.
Data cable KD-2
CGU 04i module settings can be done remotely via GPRS. Remote configuration
access is protected by password. The enter password it is possible only after straight connect
by service cable.
2.11. Service cable
CGU 04i – PC connection cable with DCR and GND signals connected at 100 Ohm. It
is made from normal data cable KD-2 by adding service interconnection SEPRO. It is
necessary to interconnect all eight signals between CGU 04i and PC. See RJ45 connectors’
description in chapter 2.7.
Service interconnection SEPRO to the data cable
