SAFETY INSTRUSTIONS
1. Safety instructions
Please observe the following safety instructions:
•
The communication module must be used in compliance with any and all applicable
international and national laws and in compliance with any special restrictions regulating
the utilization of the communication module in prescribed applications and environments.
•
Use only the original Conel company accessories. Thus you will prevent possible health
risks and damage to the devices and ensure compliance with all relevant provisions.
Unauthorised modifications or utilization of accessories that have not been approved may
result in damage to the communication module and in a breach of applicable regulations.
Unauthorized modifications or utilization of accessories that have not been approved may
result in the termination of the validity of the guarantee, which, however, does not affect
your legal rights.
•
The communication module must not be opened.
•
Voltage at the feed connector of the communication module must not be exceeded.
•
Do not expose the communication module to extreme ambient conditions. Protect
the communication module against dust, moisture and high temperature.
•
It is recommended that the communication module should not be used at petrol stations.
We remind the users of the duty to observe the restrictions concerning the utilization
of radio devices at petrol stations, in chemical plants, or in the course of blasting works
in which explosives are used.
•
When using the communication module in close proximity of personal medical devices,
such as cardiac pacemakers or hearing aids, you must proceed with heightened caution.
•
If it is in the proximity of TV sets, radio receivers and personal computers, the telephone
may cause interference.
•
Caution! Don’t connect power supply to data connectors, it could be damage data
connectors or modem.
•
Caution! Don’t connect data cable with service interconnection SEPRO to M-BUS
interface, it could be damage SEPRO.
•
It is recommended that you should create an appropriate copy or backup of all
the important settings that are stored in the memory of the device, to database by help
program Radwin, reference
[3]
.
4
