Mounting Instructions
ProfiDAT
®
Data Transmission System
Programm 0514
MAL0514-0005b-EN
www.conductix.com
translated document
page 32 of 82
Display:
“24V OK” indicator lamp
(in the door):
Lit: ProfiDAT
®
transceiver power supply is active.
HF cables
HF cables are used for connector cables and adapter cables for the transmission of data between the transceiver and antennas (see
Fig. 15).
4.4
Modes of Operation
The ProfiDAT
®
data transmission system is used in the “normal operation” mode.
4.4.1
Normal Operation
During normal operation, the operator controls the system. No person may be present in the working area during normal operation
to monitor the working process. Traversing commands are given exclusively by the operator.
