CONDTROL NEO X200, Руководство пользователя

Страница: 10 / 68

10 10
user manual
CROSS
LINE LASER
EN
CONDTROL NEO X200
OPERATION
Before start operation remove the battery cover, insert the batteries,
observing correct polarity. Put battery cover back.
Use alkaline batteries only. Both batteries should be of the same type
and brand with the same charge level. If indicator starts flashing
red while operation replace the batteries.
Place an instrument on a firm and stable surface or a tripod.
Move the switch bar to activate necessary operating mode:
1) Automatic leveling mode
Move the switch bar to ON position . The pendulum is unlocked.
The indicator turns green.
If the instrument is out of the range of automatic compensation it will
emit sound signal.
Short press button to switch on laser lines.
Short press to switch on pulse mode. Indicator will be
green. Short press again to switch off pulse mode.
To switch off the instrument move the switch bar to OFF position .
2) Projection of inclined lines
Move the switch bar to
OFF
position . The pendulum is locked.
Indicator turns red.
Long press button during 3 seconds to switch on/off required
laser lines. Long press during 3 seconds to switch on pulse
mode. Indicator will be green. Long press again to
switch off pulse mode.