CONDTROL NEO G200, Руководство пользователя

Страница: 7 / 27

12 13
user manual
CROSS
LINE LASER
EN
user manual
CROSS
LINE LASER
EN
CONDTROL NEO G200 CONDTROL NEO G200
6. Install the instrument closer to the opposite wall. Mark location of
horizontal line on the wall as B2.
7. Turn the instrument by 180° and mark location of horizontal line on
the opposite wall as A2.
8. Measure vertical distance between marks A1, A2 and B1, B2. If
distance between measured values exceeds 3 mm – please contact
service center.
Check of vertical line
Use a plumb bob as a reference of a vertical. Place the instrument at
distance of 1,5 m from the plumb bob.
1. Move lever lock to unlocked position , then switch on vertical
plane and align vertical laser line with the low point of plumb bob.
2. If deviation between the laser line and the plumb line exceeds
±0,3 mm per 1 m of the plumb bob length (for a 2,5 m plumb bob
deviation shouldn’t exceed 0,75 mm) please contact service center.