CONDTROL 1-2-158, Руководство пользователя

Страница: 3 / 31

user manual
CROSS
LINE LASER
EN
user manual
CROSS
LINE LASER
EN
XLiner Pento 360/360G XLiner Pento 360/360G
4 5
Congratulations on your purchase of the laser level XLiner Pento 360/
Pento 360G CONDTROL. Safety instructions can be found in the end
of this user manual and should be carefully read before you use the
device for the first time.
SAFETY INSTRUCTIONS
Attention! This user manual is an essential part of this product.
The user manual should be read carefully before you use the product
for the first time. If the product is given to someone for temporary
use, be sure to enclose user manual to it.
- Do not misuse the product
- Do not remove warning signs and protect them from abrasion,
because they contain information about safe operation of the
product.
- Do not look into the laser beam or its reflection, with unprotected
eye or through an optical device. Do not point the laser beam at
people or animals without the need. You can dazzle them.
- To protect your eyes close them or look aside.
- Always install the product in such a way, so that laser line is below
or above eye level.
- Do not let unauthorized people enter the zone of product operation.
- Store the product beyond reach of children and unauthorized
people.
- Do not disassemble or repair the product yourself. Entrust product
repair to qualified personnel and use original spare parts only.
- Do not use the product in explosive environment, close to flammable
materials.
LASER RADIATION!
Do not stareinto beam
Class 2 laser
<1 mW, 635/515 nm
IEC 60825-1: 2007-03
- Laser intensive glasses are used for better recognition of the laser
beam; do not use them for other purposes. Laser glasses do not
protect from laser radiation as well as ultraviolet radiation and reduce
color perception.
- Avoid heating the battery to avoid the risk of explosion and
electrolyte leakage. In case of liquid contact with skin, wash it
immediately with soap and water. In case of contact with eyes, flush
with clean water during 10 minutes and consult the doctor.
PRODUCT DESCRIPTION
Cross line lasers XLiner Pento 360/Pento 360G CONDTROL are
intended to project vertical and horizontal planes and lines as well as
the laser dot (zenith and nadir). The laser levels are suitable for use at
both indoor and outdoor building areas.
The cross line laser has 2 operating modes:
- Automatic leveling to compensate irregularities within self-
leveling range of ± 3.5°;
- Locked compensator, to project inclined planes and lines.
Pulse mode allows using laser receiver to increase the working range
of the laser level or to work when laser is hard to define in bright
lighting conditions.