21
1) Press Menu to enter into the menu setting.
2) Use the Up / Down Arrow to select Sonar Option.
3) Press Right Arrow to enter into Sonar setting.
4) Use the Up / Down Arrow to select the Sensitivity option.
5) Press Right / Arrow to enter into the setting.
6) Press Right / Left Arrow to increase or decrease the value.
7) Press Ent to confirm the setting.
8) Press Exit to exit from the menu setting.
Fish ID. Sens.
Fish ID. Sens. adjusts the threshold of fish size on the display.
Selecting a higher setting allows weak returns being being displayed as fish, which is
helpful especially when you are intending to find smaller fish species or bait fish.
Selecting a low setting will prevent weak sonar returns being displayed as fish, which will
be very helpful when you are seeking large species of fish.
To set the Fish ID. Sens.:
1) Press Menu to enter into the menu
setting.
2) Use the Up / Down Arrow to select
Sonar Option.
3) Press Right Arrow to enter into
Sonar setting.
4) Use the Up / Down Arrow to select
the Fish ID. Sens. option.
5) Press Right / Arrow to enter into the
setting.
6) Press Right / Left Arrow to
increase or decrease the value.
7) Press Ent to confirm the setting.
8) Press Exit to exit from the menu
setting.
Water Type
Water Type is used to distinguish between fresh or salt water. The sonar spread faster in
salt water then in fresh water. So, to make your Fishfinder have an accurate performance,
please make sure the current water type setting of your Fishfinder is in line with the water
condition.
