Condor 260 BAIT, Инструкция по установке и эксплуатации

Страница: 29 / 40

29
To set the
Overlap Data
:
1) Press
Menu
to enter into
menu
setting.
2) Repeatedly press Menu to switch to
DISPLAY
menu.
3) Use the
Up/Down
Arrow to select
Overlap Data
option.
4) Press
Ent
to enter into setting.
5) Use the
Up/Down Arrow
to select the option.
6) Press
Ent
to confirm the option being displayed or
not.
7) Press
Exit
to exit the setting.
3. Alarm
Depth Alarm
The Fish finder sound an alarm tone when the bottom goes shallower or equal
than the alarm’s setting.
Note: once triggered, an alarm message will appear
on the screen. You can press Menu key to exit the
depth alarm mode, however the alarm will trigger
again until your boat move to an area where the water depth is beyond the depth
alarm range.
You also can choose exiting alarm mode by enter into Depth Alarm menu and
artificially increase the current depth alarm value to a safe grade.
To set the
Depth Alarm
:
1) Press
Menu
to enter into
menu
setting.
2) Repeatedly press
Menu
to switch to
ALARM
menu.
3) Use the
Up/Down Arrow
to select
Depth Alarm
option.
4) Press
Ent
to enter into setting.
5) Use the
Up/Down Arrow
to change the value.
6) Press
Ent
to confirm and exit the setting.