Condor 260 BAIT, Инструкция по установке и эксплуатации

Страница: 18 / 40

18
Sonar working method
When sonar works, the signals are remitted in the direction as instructed below:
So, in the area A and area B, there should be no any obstacle, otherwise the sonar
signals will be “blocked”, thus sonar unit will not be able to receive the signal
normally, which will cause short Remote Control distance, or abnormal display on
the screen.
For example, in the following sensor mounting figure,
A is right; B is wrong;
- In the A mounting position, the sonar signals can be remitted without any
obstacle in the two direction;
- In the B mounting position, the sonar signals cannot be remitted normally, as
they are blocked by the hull of the bait boat;