background image

 

57 | 

Nortec SAM-e Installation

 

Warranty 

 

 

 

 

 

Condair Inc. and/or Condair Ltd. (hereinafter collectively referred to as THE COMPANY), warrant 

for a period of ten years after installation, that THE COMPANY’s manufactured and assembled 

products, not otherwise expressly warranted (with the exception of the tube coupling seals, two 

years only), are free from defects in material and workmanship. No warranty is made against 

corrosion, deterioration, or suitability of substituted materials used as a result of compliance 

with government regulations. 

THE COMPANY’s obligations and liabilities under this warranty are limited to furnishing 

replacement parts to the customer, F.O.B. THE COMPANY’s factory, providing the defective 

part(s) is returned freight prepaid by the customer. Parts used for repairs are warranted for the 

balance of the term of the warranty on the original humidifier or 90 days, whichever is longer. 

The warranties set forth herein are in lieu of all other warranties expressed or implied by law. No 

liability whatsoever shall be attached to THE COMPANY until said products have been paid for in 

full and then said liability shall be limited to the original purchase price for the product. Any 

further warranty must be in writing, signed by an officer of THE COMPANY. 

THE COMPANY’s limited warranty on accessories, not of the companies manufacture, such as 

controls, humidistats, pumps, etc. is limited to the warranty of the original equipment 

manufacturer from date of original shipment of humidifier.  

THE COMPANY makes no warranty and assumes no liability unless the equipment is installed in 

strict accordance with a copy of the catalog and installation manual in effect at the date of 

purchase and by a contractor approved by THE COMPANY to install such equipment. 

THE COMPANY makes no warranty and assumes no liability whatsoever for consequential 

damage or damage resulting directly from misapplication, incorrect sizing or lack of proper 

maintenance of the equipment. 

THE COMPANY makes no warranty and assumes no liability whatsoever for damage resulting 

from freezing of the humidifier, supply lines, drain lines, or steam distribution systems. 

THE COMPANY makes no warranty and assumes no liability whatsoever for equipment that has 

failed due to ambient conditions when installed in locations having climates below 14°F            

(-10°C) during January or above 104°F (40°C) during July.   

THE COMPANY retains the right to change the design, specification and performance criteria of 

its products without notice or obligation.

 
 

 

Содержание Nortec Mini SAM-e































































Отзывы: