Condair Nortec EL-Series, Руководство по эксплуатации и обслуживанию

Страница: 16 / 96

16 Operator Interface
2582954_D_EN_1811_Nortec-EL_OM Nortec EL
4.2.2 General Navigational Elements
Figure 6
show the general navigational elements/features of the screens on the touchscreen display.
Figure 6:
1
2
3
4
5
6
7
8
9
10
General Navigational Elements
1 Return button – cancel and return to previous menu level.
2 Current menu/sub-menu selection
3 Previous Tab button – return to the previous tab in the current menu/sub-menu selection.
4 Next Tab button – continue/go to the current/next tab in the menu/sub-menu selection.
5 Current tab
6 Increase button – increase the setpoint value.
7 Decrease button – decrease the setpoint value.
8 Help button – access context-sensitive help.
9 Confirm button – confirm the change/selection. Changes will not be stored if this button is not pressed.
10 Additional information icon – access additional information.
4.2.3 Operating Status
The operating status area of the Home screen (refer to Figure 5 ) shows the current operating status
message and an associated status icon. The messages are described in Table 2 , and the status icons
are described in Table 3 on page 17 .
Table 2: Operating Status Descriptions
Message Description
Standby The humidifier is in standby mode (no humidity demand).
Draining The humidifier is draining the steam cylinder.
Idle Drain There has been no demand for humidity for an extended period of time.
The idle drain function has drained the humidifier. The humidifier will auto -
matically refill when it receives a humidity demand.
Partial Drain There has been no demand for humidity for an extended period of time.
The partial drain function has drained the water off of the electrodes.
Humidifying The humidifier is generating steam.