Condair Nortec EL-Series, Руководство по эксплуатации и обслуживанию

Страница: 15 / 96

15 Operator Interface Nortec EL
2582954_D_EN_1811_Nortec-EL_OM
4.2 Control Software
The control software runs in the background and controls all the functions of the Nortec EL steam humidifier.
The user interacts with the control software through the screens on the touchscreen display. Details of
the screens are described in the sections below.
Note:
The screens shown in this chapter are for representation purposes only, and may differ from what
is displayed on your humidifier.
4.2.1 Home Screen
When the Nortec EL steam humidifier is turned on, it starts initializing and performs system checks.
When initialization and system checks are completed successfully, it goes into the normal operating
mode. The Home screen then appears on the touchscreen display.
The major elements of the Home screen are shown in
Figure 5 .
Figure 5:
2
3
4
5
6 7
8
9
10
1
11
Home Screen Elements
1 Current date and time
2 Operating status message – refer to "Operating Status" on page 16 for details.
3 Humidity control information – shows the type of control signal and the steam output requested.
4 Service/Warning/Fault status message – refer to "Maintenance and Fault Status" on page 17 for details.
5 Steam Cylinder selector. Only available on units with dual steam cylinders, and units controlled by the Linkup system. Select the ap-
propriate tab to view its status on the Home screen.
6 <Help> button – access technical support help information. Refer to "Help" on page 18 for details.
7 <Drain> button – manually initiate the drain function. Refer to "Manually Initiate Steam Cylinder Draining" on page 59 for details.
8 <About> button – access the system information. Refer to "System Information" on page 18 for details.
9 <Menu> button – access the Main menu. Refer to "Main Menu" on page 25 for details.
10 Visual indication of the current steam output level.
11 Condair humidifier model number