● Mobile can be used well during charging.
Warn: please put mobile in the draft of 0
℃～
40
℃
during charging. Standard charger is
needed, or it will be dangerous and in this case, it will not be guaranteed.
3.4 User of battery
When red LED is off or flash quickly, which means low battery, it should be charged in
time.
When charged, solid bright means charging and slow flash means already full charged.
Warn: When abandon the mobile for a long time, its battery will be over-discharged. In this
case, when charging the next time, red LED will only start flashing after 15 minutes, which
is normal.
3.5 Install SIM card
Upper push the back cover of mobile and remove it, insert SIM card in the slot and lock
the cover.
4. Operation manual
4.1 Power on/off
This mobile does not have power on/off key.
Power on:
Put SIM card and battery inside the mobile, then the mobile will be turned on
automatically.
At that time, special 1/2/3/4 keys and SOS key will light and turned off after 20s. GMS LED
and power LED keep flash.
Once the mobile is on, its GPS will begin to search. GPS LED will keep solid light for 20s
after succeeding in locating, or it will be off if failed to locate in 5 minutes.
Power off:
Remove the battery.
4.2 Ring setting
SMS:
RING, ring parameter#
Ring parameter range: 1-10
For example: RING, 2#. It means select the second ring as incoming ring tone.
4.3 Specific number setting
There are three ways to set special numbers.
4.3.1 Set via SMS command
The specific number can be set via SMS command sent from mobile phone
Sending SMS command:
SOS, A,number1,number2,number3,number4#
(A means add
number)
For example:
SOS, A,13510682360,13511685136,13612687248,13612683621#
A is regarded as operation of adding phone number.
It will
reply “OK” if succeeded.
