10
GETTING STARTED
To remove the SD card:
Press the memory card into the slot then release. When the card is partially ejected, pull it out.
Note:
If the “
Memory Full!
” warning message appears on the LCD, it means the SD card or
internal memory is full. Please remove the memory card and insert a new one or transfer all
images to your computer.
TURNING THE CAMERA ON AND OFF
Press the
Power
button to turn the camera on. The green Power lamp will light up, the LCD will turn
on automatically.
After one minute of inactivity, the LCD will automatically power off. Then the camera will automatically
power off after being idled for around 3 minutes by default. To power off the camera sooner, press the
Power
button.
SETTING TIME AND DATE STAMP
When you first use your camera or when the batteries are removed for an extended time
(approximately 120 minutes), you will need to set the Date and Time . The date and time information
will be displayed on the picture if date stamp is turned on.
1. Slide the
Function
switch to
(Capture mode).
2. Press the
MENU
button.
3. Press the
or
button to select
Ad (Advance)
, and
then press the
Enter
button to enter its sub-menu.
4. Press the
or
button to select
Date Time
, and
then press the
Enter
button.
5. Press the
or
button to highlight the field to be
changed, and then press the
or
button to set the
value.
6. Press the
or
button to highlight
Date stamp
, then
press the
Enter
button to turn the function on.
7. When the setting is completed, press the
MENU
button to return to capture mode.