Concoa 526 **1 Series, Инструкция по установке и эксплуатации, Страница: 3 / 16

3
DESCRIPTION OF PRODUCT
The 526 series switchover is an automatic switchover system designed to provide a continuous supply of
high purity gas. This unit may be used with one cylinder per side, or used with a manifold that has increased
storage capacity. The inlet of the switchover system may be purchased with open ports, diaphragm valves,
manifold con nec tors, or fl exible pigtails. The system, when con fi g ured with manifold connectors, is for use
with the 528 Series Manifl ex system. If constant outlet pressure is required, a regulator will need to be
installed as part of the switchover system (as with the 526 XX1X through XX7X models) or down stream
after the switchover system. If the system includes the optional remote alarm, refer to ADI 5106 or ADI
8824 for installation and operation instructions. The standard switcho ver system will main tain a vari able
line pres sure within the values shown in the table below:
MODEL NUMBER OUTLET PRESSURE (without Line Regulator)
526 2X0X 35-95 PSIG 2.4-6.5 BAR
526 3X0X 65-135 PSIG 4.5-9.3 BAR
526 4X0X 160-235 PSIG 11-16.2 BAR
526 5X0X 445-545 PSIG 30.7-37.6 BAR
526 7X0X 120-185 PSIG 9.0-12.8 BAR
Standard System
Confi guration
System Confi guration
with Line Regulator
Diaphragm Valve
Manifold Connector
Pigtail with
Cylinder Connection
Figure 1 - System Confi gurations and Parts
Line Pressure Gauge
Inlet
Auxiliary
Inlet
Left Bank
Inlet Gauge,
Outlet
Inlet
Inlet
Auxiliary
Right Bank
Inlet Gauge,
PRECISION GAS CONTROLS
R A E S N I C
R A E SE
DE
WWW.CONCOA.COM
C
E
®
Relief Valve
Relief Valve