ENGLISH
45
Note:
In the picture below you will see an example of a Virtual Server configuration.
E.
Select a “
Rule Index
” that is not in use. You can check this in the Virtual Server Listing.
F.
Enter a name for your Virtual Server Rule in the “
Application
” field.
G.
Select the Protocol for your Virtual Server rule: “
TCP
”, “
UDP
” or “
ALL
”.
Note:
If you do not know which protocol you need for your Virtual Server Rule, select “
ALL
”. This
option will pass both TCP and UDP traffic to the configured IP address of your computer/server.
H.
Enter the Start and End Port Number for the Virtual Server Rule.
I.
Enter the IP address of your computer/server which needs the Virtual Server Rule.
J.
Click on “
SAVE
” to create and save the Virtual Server Rule.
When the Virtual Server Rule is saved, it will be shown in the “
Virtual Server Listing
”.
To create more Virtual Server Rules repeat steps
E
to
J.
The defined Virtual Server rules are ready to use!
