ENGLISH
11
2. The C150RU explained
Top Bottom
Nr Description
Status
Explanation
1
USB connector
-
Connect the C150RU to your computer.
2
Ventilation holes
-
Breathing holes for ventilation.
3
Activity LED
Flashing
consistently
The adapter is not connected to a network.
Flashing randomly
The adapter is connected to a network and
sending or receiving data.
4
WPS button
-
Press to start the WPS function.
3. Hardware installation
Before you can install the drivers & software, you need to connect the 150
N
Wireless USB Adapter to your
computer.
•
Turn on your computer.
•
Plug the 150
N
Wireless USB Adapter into a free USB port on your computer.
The computer will recognize new hardware and shows the ‘
New Hardware Wizard
’.
•
Ignore this wizard or click on “
Cancel
” to close this wizard.
You can now proceed with the driver & software installation, described in
chapter 4
.
Note:
When using Windows 7, you may skip
chapter 4
, since windows 7 will automatically install the
needed native drivers. However, when using these native drivers, the WPS functionality and the
Conceptronic Wireless Network Config Utility are not available. When you choose to skip
chapter
4
, you can also skip
chapter 5.1 ~ 5.4 and
continue to
chapter 5.5
.
3
4
1
2
1
