Concept2 VP6200, Руководство пользователя

Страница: 39 / 100

39
EN
VP6200
4. The current power level is indicated by a light signal (C).
5. At the lowest power, i.e. level 1, signalling (C) is not on. When medium power is switched on, i.e. level 2, the
signalling lights up white, at maximum power, i.e. level 3, the signalling lights up blue.
Note: We recommend to use the maximum power of both the hand unit and the turbo brush in the case of heavily soiled
surfaces or medium-high or high pile carpets.
WET WIPING (MOP)
1. If you also want to mop during vacuuming, place the turbo brush in the water
tank (14) and press lightly, you will hear a click (Fig. 1).
2. Before use, loosen the water tank cap and fill the tank with distilled water (Fig.
2) Observe the maximum water level indicated by the MAX line on the side of
the water tank (Fig. 2).
3. If you want to mop, moisten the cleaning cloth (17) by repeatedly pressing the
water pump on the water tank. We recommend to moisten the cloth before use
to ensure more efficient cleaning.
4. After mopping, pour water out of the tank.
CAUTION! Use only distilled water to fill the water tank!
Always switch off the appliance before filling the water tank with distilled water,
emptying the water tank or replacing the cleaning cloth.
REMOVING AND CLEANING THE CLEANING CLOTH
1. Use the power button to switch off the appliance.
2. Remove the water tank from the turbo brush (6) and then remove the cleaning
cloth.
3. Wash the cloth in the washing machine at a maximum of 40 °C and use a mild
detergent.
Important
: Never use bleach or fabric softener to wash the cloth.
ACCESSORIES
Select the accessories according to the nature of the surface to be cleaned.
Water tank with a cleaning cloth – suitable for hard floors
Slot nozzle – suitable for wall corners, car cushioning, radiators, etc.
Nozzle with a brush
– suitable for bedding, fabric, sofa, etc.
Hardfloor brush – suitable for hard floors
Wall stand – assembly kit
EMPTYING AND CLEANING THE DUST CONTAINER
1. To empty the dust container (8), first press the dust container release lock (16) and remove the container from the
hand unit (4).
2. Press the dust container lock (9) to open the container, empty the dust, remove the soiled filters from the container
and clean them.
3. Insert cleaned filter back in the dust container and close the lid.
4. Insert the dust container (8) back in the hand unit, you must hear a click.
Water pump
Water
MAX
Fig. 1
Fig. 2
www.robotworld.cz