39
VP6010
VP6010
EN
OPERATING INSTRUCTIONS
Vacuum cleaner assembly
Always disconnect the plug out of the electrical outlet before assembling or removing accessories!
1. Attach the extension tube (9) into the hand unit of the vacuum (10) until you hear a click sound. To remove the tube
from the hand unit, press the release button (5) and pull away.
2. Attach the turbo nozzle (8) to the extension tube (9), you will hear a click sound. To remove the turbo nozzle from
the extension tube, press the release button (5) and pull away.
You can insert the turbo nozzle to the hand unit as described (10).
BATTERY INSTALLATION
Insert the battery (4) into the body of the hand unit (10) and install to prevent it from loosening. The battery is placed
correctly when you heard a sound. To release the battery, press the release button and pull away.
Note
: To prolong the battery life, always charge the battery when the battery is nearly empty. Do not store or recharge
the appliance in environment with temperatures below 0 °C or higher than 40°C. These temperatures may damage the
appliance. During the charging process, the temperature of the appliance may increase, this is normal.
While the battery is being charged, the operation / power indicator (2) flashes and remains lit after charging.
If you do not use the vacuum cleaner for more than 3 months, allow it to charge for 12 hours. Then place the vacuum
cleaner in a dry and cool place.
OPERATION
Before installing the battery, check if it is fully charged.
1. Press the ON/OFF switch (1) on the handle of the vacuum to turn the cleaner on.
2. You can regulate the speed of the vacuum/turbo nozzle with the speed control (3).
3. To turn the cleaner off, press the ON/OFF switch again.
Note
: We recommend to use the maximum power of both the hand unit and the turbo nozzle in the case of heavily
soiled surfaces or medium or high pile carpets.
ACCESSORIES
Select the accessories according to the nature of the surface to be cleaned.
Mini turbo brush
– suitable for bed linen, fabric, sofa, etc.
Slot nozzle
– suitable for wall corners, car cushioning, radiators, etc.
Slot nozzle with brush
– suitable for bedding, fabric, sofa, etc.
EMPTYING THE DUST CONTAINER
To empty the dust container, press the empty button (7). Open the container, empty the dust and close the container
cover.
REMOVING THE FILTER
Turn the hand unit lid clockwise. Pull out the HEPA filter vertically after release.
The HEPA filter can be rinsed in water. Allow the HEPA filter to dry before returning it back to the hand unit.
