Concept2 VP4170, Руководство пользователя

Страница: 40 / 85

78 79
VP4170 VP4170
EN EN
Removable turbo nozzle
Turbo nozzle release
button
LED light
CHARGING THE APPLIANCE
1. Insert the hand-held vacuum cleaner into the rod vacuum cleaner. Ensure that the rod vacuum cleaner is off.
2. Place the rod vacuum cleaner into the charging base. Ensure that the charging base is placed on a level and
stable surface. Make sure there is no dust between the hand-held vacuum cleaner and the rod vacuum cleaner. If
necessary, clean the contacts.
3. Plug the power cord into the socket. The charging indicator lights up red, indicating that the vacuum cleaner is
charging. When charging, it is normal for the vacuum cleaner or the charging base to heat up.
Note: Even if the rod vacuum cleaner is on, if it is placed in the charging base, it automatically shuts off. While the rod
vacuum cleaner is charging, the vacuum cleaner has a current protection element. Even if you press the power button,
the appliance will remain switched off.
LED indicator
Adaptor slot
ASSEMBLING THE APPLIANCE
Folding handle
To fold the handle, press the fold the handle button. When lifting the handle vertically, it will automatically lock into
the correct position.
Vypněte
Stiskněte
Off
Press
Assembling the charging base
The charging base must be placed on a flat surface, using screws and wall plugs it can be attached to the wall.
Place the screws and wall plugs on the underside of the charging base. Drill holes into the wall and insert the wall
plugs into the holes.
Then, fasten the charging base with the screws.