USER'S MANUAL
Before first use
Before first use you should wipe the outside and inside of the appliance with a damp cloth for hygiene
reasons.
Ventilation mode
The extracted air is discharged through the flexible outlet duct to the ventilation shaft out of the room. If the
appliance is equipped with a carbon filter, remove it (see chapter Cleaning and maintenance).
1. Push button (2) to switch on the appliance.
2. Using buttons (1) and (2) select the required value of the extracted air exhaust output.
3. The display (3) shows the output value (1-4).
4. To turn the appliance off, press and hold the button (1) until a small dot or 0 (if the lightning is on) appe-
ars on the display.
Note:
The appliance is equipped with so-called boost function. This means that if the maximum air output level (4)
is selected and the output does not get reduced within 5 minutes of operation, the air output will be automa-
tically reduced to stage 3. This time is fixed and cannot be changed.
Recirculation mode
If there is no possibility of discharging the extracted air out of the room, you can use the recirculation mode.
In this case, the extracted air is filtered through the metal fat filters and the carbon filter. An active carbon
in this filter absorbs the smell. Air, free from the smell, flows back into the room through openings situated in
the upper chimney cover. When the recirculation mode is used, it is necessary to purchase and install the
appropriate carbon filters (see chapter Cleaning and maintenance).
1. Push button (2) to switch on the appliance.
2. Using buttons (1) and (2) select the required value of the extracted air exhaust output.
3. The display (3) shows the output value (1-4).
4. To turn the appliance off, press and hold the button (1) until a small dot or 0 (if the lightning is on) appe-
ars on the display.
Note:
When the recirculation mode is used (carbon filter installed), the extracted air output can drop.
Delayed shutdown function
1. Press (+) to switch on the appliance and select the desired air output level (1-4).
2. Press the (T) button to activate the delayed shutdown function. After the button is pressed, „0“ symbol
will be flashing on the display.
3. Press the (-) or (+) button to set the desired time of delayed shutdown, which can be set to 10 - 90 mi-
nutes. The delayed shutdown time is displayed in minutes, 1 = 10 minutes, 2 = 20 minutes, etc. Press the
(T) button to confirm the set delayed shutdown time. The display will be showing the set air output level
and the dot at the bottom right next to the selected air output level will be flashing.
4. When the set time of the delayed shutdown runs out, the appliance switches off automatically. If the
lighting is on, the lighting remains on even after the delayed shutdown.
65
EN
OPO5890
Содержание OPO5890
