Concept2 MT4020BC, Руководство пользователя

Страница: 43 / 50

43
EN
MT4020bc
Toothing of plate (bottom side)
Glass plate
Roller wheel
Pin of plate drive
Installation of turntable plate
1. Never place the glass plate upside down.
Nothing should prevent the glass
plate from turning.
2. The turntable plate and roller wheel
assembly must always be used during cooking.
3. All meals and food containers must always
be placed on a glass plate.
4. If the glass plate or roller wheel breaks,
contact the nearest authorized service centre.
NOTE
Prior to using a new unit, wipe the surface and the inside with a wet cloth for hygienic reasons. Wash all the
removable parts in warm water with detergent.
WARNING!
Open the door slowly and carefully. When opening the door during operation, or after preparation, a large
volume of steam is released, and condensed hot water may drip from the lower door edge. There is a risk of
scalding.
Microwave oven cooking principles
Place the food evenly. Place thicker areas at the edges.
Watch the cooking time. Cook for the shortest of the prescribed times, and if necessary, for longer.
Overcooked food can ignite.
Cover the food when cooking. Covers prevent spattering and enable more even heating.
Turn around pieces of food such as chicken or hamburger when cooking. Big pieces, such as roast meat, must
be turned more than once.
Move meatballs and similar food from the edge towards the centre and vice versa halfway through the
cooking time.