Concept2 MNV4745, Руководство пользователя

Страница: 148 / 174

148
EN
MNV4745
Setting the dosage of the rinse aid
For better drying results with a limited amount of rinse aid, the dishwasher is designed to adjust consumption
according to user settings. Follow the steps below.
1.
Close the door and switch on the dishwasher by plugging it into an electrical outlet.
2. Within 60 seconds after step 1, press the “Program” button [3] for more than 5 seconds and then press the
Delayed Start” button [6] to enter one of the pre-set options, the rinse aid status indicator flashes once per
second.
3. Press the “Program” button [3] to select the most appropriate setting to match your habits, the settings will
change in the following order: D1-> D2-> D3-> D4-> D5-> D1. The higher the number, the more rinse aid the
dishwasher uses.
4. Without reaction within 5 seconds or by pressing the “On/Off” button [1], you finish the setting, the setting is
completed successfully.
Selector position Amount of rinse aid (ml)
D1 1,2
D2 2,4
D3 3,6
D4 4,8
D5 6,0
If you only use a detergent with the integrated rinse aid, decrease the dosage of the rinse aid to minimum.
DETERGENTS
Detergents can be divided into four groups according to the form:
a) Loose,
b) Liquid,
c) Tablets,
d)
Combined detergents (e.g. 3 in 1 tablets).
Detergents can be divided into two groups according to the chemical composition:
a) Alkaline,
b)
With natural enzymes.
They can be also divided into:
a) phosphate and chlorine,
b) phosphate and chlorine-free,
c) phosphate-free and chlorine-free.
• When using phosphate-free detergents with hard water, a white film can be created in the appliance interior.
• Increasing the dose of detergent will prevent the sediment and get better washing results.
• Chlorine-free detergents have less bleaching effect. This may lead to enhancement of tea residue stains or
colouring of plastic dishes. In this case, use a stronger washing program, increase the dose of detergent or use
a chlorine detergent.