Concept2 MNV4260, Руководство пользователя

Страница: 158 / 164

158
EN
MNV4260
Dishes are moist
Dishes were loaded
improperly
See „Loading dishware“.
Insufficient amount of rinse
aid
Use more rinse aid.
You unload the dishes too
soon.
Do not unload the dishes immediately after
the washing program is done. Open the door
slightly to allow the excess steam to escape. Start
unloading when the dishes are almost cold to the
touch. Always unload the lower rack first and then
the upper rack to prevent the excess water from
the upper rack flowing down onto the dishes in
the lower rack.
Wrong washing program
was selected
The short washing program is less effective than
the long programs and the temperature is also
lower. Select longer washing program.
Cutlery with wooden handle
Draining water from these is more difficult. This
type of cutlery is not suitable for washing in the
dishwasher.
ERROR MASSAGE
In the event of a fault, the warning lights will blink next to the wash programs.
Code Description of error Possible cause
The Rapid light flicker
fleetly
Longer inlet time.
Faucets is not opened, or water intake is
restricted, or water pressure is too low.
The Rapid and 90 min light
flicker fleetly Not reaching required
temperature.
Malfunction of heating element.
The ECO light flicker fleetly Overflow. Some element of dishwasher leaks.
The Intensive, ECO and
Rapid light
Failure of communication
between main PCB with
display pcb.
Open circuit or break wiring for the
communication.
Note:
• In case of overflowing turn off the main water supply and then contact the service.
• Before restarting the appliance, remove the excess water from the interior of the appliance.