Concept2 MN3360ss, Руководство пользователя

Страница: 161 / 168

161
EN
MN3360ss / MN3360wh
Dishes are moist
Dishes were loaded
improperly
See „Loading dishware“.
Insufficient amount of rinse
aid
Use more rinse aid.
You unload the dishes too
soon.
Do not unload the dishes immediately after
the washing program is done. Open the door
slightly to allow the excess steam to escape. Start
unloading when the dishes are almost cold to the
touch. Always unload the lower rack first and then
the upper rack to prevent the excess water from
the upper rack flowing down onto the dishes in
the lower rack.
Wrong washing program
was selected
The short washing program is less effective than
the long programs and the temperature is also
lower. Select longer washing program.
Cutlery with wooden handle
Draining water from these is more difficult. This
type of cutlery is not suitable for washing in the
dishwasher.
ERROR MASSAGE
Rapid washing program or Glass washing program indicator will start flashing in case of malfunction.
Indicator Kļūdas apraksts Iespējamais cēlonis
Flashing indicator of Rapid
washing program
Filling the dishwasher with
water takes too long
Check the water supply (tap is not opened,
the water supply is limited, water pressure is
too low).
Flashing indicator of Glass
washing program
Dishwasher is overflowing
Too much inflowing water. Check the water
supply pressure.
Note:
• In case of overflowing turn off the main water supply and then contact the service.
• Before restarting the appliance, remove the excess water from the interior of the appliance.