Concept2 MN3360ss, Руководство пользователя, Страница: 150 / 168

150
EN
MN3360ss / MN3360wh
PUTTING THE APPLIANCE INTO OPERATION
Starting the washing program
1. Open the appliance door.
2. Check the amount of detergent, regenerating salt and rinse aid and refill if needed.
3. One by one pull out the upper and lower rack, load the dishes and then slide the racks back. We recommend
loading the lower rack first and then the upper rack (see „Loading dishware“).
4. Make sure that the water tap is open.
5. Close the appliance door and switch on the appliance by pressing the (1) button.
6. Press button (2) repeatedly to select the desired program. The display (9) shows the preset time of the selected
program.
7. By pressing button (5) you can choose whether the upper spray arm, the lower spray arm or both will be
operating for the selected program. This is possible on all washing programs.
8. If you require a delayed start, press the delayed start function button (6) repeatedly. The delayed start can be set
up to 24 hours.
9. Press the Start button (8) to start the set washing program, or the delayed start countdown.
10. Press button (1) to turn the appliance off.
Caution!
Be careful while opening the door of the appliance, a large amount of water vapour can be released or
hot water can spurt. There is a danger of scalding!
11. Hot dishes are very fragile. We recommend leaving the dishes to cool down for about 15 minutes before
unloading.
Changing the program during the running washing program
The washing cycle can only be changed if it is not running for a long time, otherwise the detergent could already be
released and the dishwasher could have drained the washing water. In that case, the dishwasher must be reset and
the detergent dispenser must be refilled (see chapter “Filling the detergent dispenser”). To reset the dishwasher,
follow these steps:
1. Press the Start/Pause button (8) to pause the washing.
2. Press the Program button (2) for more than 3 seconds to cancel the program.
3. Press the Program button (2) to select the desired program.
4. Press the Start/Pause button (8), after 10 seconds the dishwasher will start.
Note:
• If you open the appliance door during the running wash program, the program will be paused.
• A beep sound occurs every minute to warn the door is open during the running program.
3 sec