Concept2 LT3047bc, Руководство пользователя, Страница: 60 / 70

60
EN
LT3047bc / LT3047wh
• If you do not attend to store frozen food, there is no need to have the set to the maximum cooling power. If you
leave the temperature set to the maximum cooling power for a long time, the drain line may get frozen.
• This appliance is designed for use at ambient temperatures of 16 °C to 43 °C. The appliance may not function
properly if it is used in environment with ambient temperatures listed in the table.
Climate class Ambient Temperature
T 16 °C up to 43 °C
ST 16 °C up to 38 °C
N 16 °C up to 32 °C
SN 10 °C up to 32 °C
Tips for storing food in a refrigerator
The refrigerator is used to store fresh food for several days.
• Be aware that stored food should not touch the back wall. Leave some space around the individual items to ensure
air circulation in the refrigerator.
• Do not put hot food or drinks in the refrigerator. It will increase the humidity inside the refrigerator.
•
Store the food in closed containers or packed.
• Store liquids in closed containers or bottles.
• It is recommended to place the wrapped meat on the glass shelf above the fruit and vegetable drawer.
Please follow the instructions below to avoid degrading of stored food.
•
Do not open the refrigerator door for longer than necessary, as the supply of warm air significantly increases
the temperature inside the appliance.
• Clean surfaces that may be in contact with food and drainage channels regularly.
• Fresh meat and fish should be stored in a suitable place to avoid contact with other foods.
Tips for storing food in a low temperature zone
In the low temperature zone, it is possible to store food or drinks intended for rapid cooling in a short time. This zone
is not used for long-term storage of frozen food.
USER MANUAL
Before first use
Before first use you should wipe the outside and inside of the appliance with a damp cloth for hygiene reasons. Wash
all removable parts with warm soapy water.
After installing the refrigerator, leave the appliance standstill for at least half an hour before connecting to the mains.
It is necessary to allow th
e cooling gases to set down. Then you can connect the refrigerator to the mains and let it run
for 2-3 hours to stabilize a normal operating temperature. A slight odour may occur during this time. It will go away as
soon as the appliance starts to cool. Then put fresh or frozen food inside the appliance.
Note : If a power failure occurs during the first run, wait for at least 5 minutes before switching on again or connecting
to the mains.