Concept2 LO 7055, Руководство пользователя

Страница: 31 / 56

EN
23 LO7040
If the juice must be stored for several hours, put it in a fridge in crockery or glass kitchenware. You may improve the
preservation features by adding lemon juice.
• You can use the pulp for the preparation of other food (jam, fruit salad, etc.).
• If the fruit is very watery (melons, etc.), insert it slowly in order to extract as much juice as possible.
• If you use very ripe fruits, there can be very little juice. In such case it is necessary to process the fruit very slowly,
so that the juice drains easily, and the rotating sieve does not clog.
• It is common that when processing apples and bananas no juice is extracted.
Extraction
Note: The unit can be turned on only if the upper cover and locking clip are assembled correctly.
1. Put the unit on a stable surface.
2. Attach the pulp container to the side of the unit.
3. Attach the juice drain cover to the upper part of the body (Fig. 1).
4. Put the rotating sieve on the juice drain cover by pressing on the upper edge of the sieve and pushing down (Fig. 2, 3).
5. Put on the upper lid, and fix it. Place the juice collection container under the juice drain.
6. Select the required speed according to the processed food using the speed switch. A higher speed is suitable for food
with a lower juice content (apples, carrots, etc.). A lower speed is suitable for food with a higher juice content (pears,
oranges, peaches, etc.).
7. Insert washed pieces of food into the feeder slowly.
You can put in whole apples and pears, or you may cut them into pieces. You don‘t have to peel them or remove
the cores. Peel oranges first; feed in grapes only individually. You may put in whole bunches when juicing currants.
It is difficult to extract juice from bananas, avocados, blackberries, figs, strawberries, etc.
CLEANING AND MAINTENANCE
Before cleaning the unit, always disconnect the power cord from the wall outlet!
The surface of the unit may only be cleaned using a wet cloth. Do not use any detergents or hard objects, as they may
damage the unit’s surface!
Wash the removable parts in warm water. Use the supplied brush.
Never clean the unit under running water, do not rinse it, and do not submerge it in water!
1. Open the upper cover.
2. Release the juice drain cover upwards together with the rotating sieve.
3. Remove and clean the pulp container.
4. After you finish cleaning the removable parts, follow the reverse steps to reassemble the unit.
NOTE: Always use the tamper to push food through the stuffing opening. Never push in food using your fingers,
a fork, spoon, knife or any other object.
8. Continuously check the volume of pulp in the container, or stuck to the upper lid, and the clearness of the juice drain.
The juice drain cannot be clogged. Before you open the upper lid, wait until the rotating sieve stops. Release the
upper lid by tipping the locking clip, clean it, empty the pulp container, clean the rotating sieve and remove the
remaining pulp from the juice drain cover.
WARNING!
If the noise level becomes considerably higher, or there are stronger vibrations, clean the unit immediately!
9. Turn the unit off after use, disconnect from the power socket, remove the pulp and clean the individual parts (see
Cleaning and maintenance).
NOTE: Extracted juice is designed for immediate consumption, as it oxidizes very fast
in the open air, which can
worsen the taste, change the color and, most importantly, decrease the nutritional value.
Apple or pear juice turns brown fast; you can slow down this process by adding a few drops of lemon juice.
The juice container is not designed for keeping juice or other food!
EN
24 LO7040
EN
29 LO 7055