Concept2 LKR3455bcr, Руководство пользователя

Страница: 57 / 64

57
EN
LKR3455bcr / LKR3455ber / LKR3455rdr
USER MANUAL
Before first use
Before first use you should wipe the outside and inside of the appliance with a damp cloth for hygiene reasons. Wash
all removable parts with warm soapy water.
After installing the refrigerator, leave the appliance standstill for at least 2 hours before connecting to the mains. It is
necessary to allow the cooling gases to set down. Then you can connect the refrigerator to the mains and let it run for
2-3 hours to stabilize a normal operating temperature. Then put fresh or frozen food inside the appliance.
Note
: If a power failure occurs during the first run, wait for at least 5 minutes before switching on again or connecting
to the mains.
Setting the Temperature of Refrigerator Zone
1.
Open the refrigerator door.
2.
You can set the internal temperature of the refrigerator compartment and freezer compartment with the
inside temperature controller (figure 1).
3.
Turn the knob from position 1 to position 5 to get a cooler temperature inside the appliance.
- The numbers displayed on the controller do not indicate a specific set temperature, but a temperature
level
- If the thermostat is set to position 0, it is switched off and the appliance does not cool or freeze.
- For normal food storage in the freezer, set the thermostat to position 2 to 4.
- The refrigerator should be in operation for at least 24 hours to reach the required cooling temperature.
Allow the refrigerator to cool completely before placing food. It is best to wait 24 hours before placing food in the
refrigerator.
Fig. 1
0
5
OFF
Setting the Temperature of Freezer Zone
•
The freezer temperature is set automatically according to the set temperature in the refrigerator and it cannot be
altered.
Note : Frozen water droplets may appear on the back wall of the refrigerator, it is a common phenomenon not a defect
of the appliance.