•
When baking with the fan
it is not necessary to pre-heat the appliance, except for baking food with very
short baking times, or in the case of baking food with a high water content (e.g. fruit cakes) to prevent con-
densation of water vapours. In this appliance, various foods with similar baking/roasting times can be pre-
pared in two trays simultaneously, even if the baking/roasting time differs. The scent and taste of the foods
do not influence each other. Putting in and taking food out of the appliance does not result in huge heat
losses. The temperature is quickly compensated by the fan. The baking temperatures are lower than those
used in the standard baking mode (by 20 – 30°C for pastry and by 30 – 40° C for meat); the time of baking
is longer (by approx. 5 – 10 minutes). When baking small pastries in two pans, we recommend swapping
the height of both pans after 2/3 of the baking time or taking the pan that is ready sooner out earlier.
•
When defrosting
, lay the frozen food in the packaging on a dish, put it on the grill in the centre of the
appliance and switch-on the appliance in Defrost mode. The appliance door must be closed.
•
When grilling with the fan and upper heater
it is not necessary to pre-heat the appliance. Grill with the
appliance door closed. When grilling this way set the thermostat as needed within the range from 50 to
200°C. The distance between the food and the grill heater must correspond to the required results:
- smaller distance for a brown surface and underdone inside,
- bigger distance for thorough roasting of the food.
For catching the dripping gravy, place a plate with a little water under the meal.
OPERATING INSTRUCTIONS
Before the first use
Prior to using a new unit, wipe the inside with a wet cloth for hygienic reasons. Wash all the removable parts
in warm water with a detergent, or in a dishwasher.
Then, heat the unit without food at maximum temperature (250°C) for 30 minutes. You can find the infor-
mation related to the temperature and heating time adjustment in the paragraph Appliance Fundamental
Functions (page 70). The unit may emit a slight smell and smoke, which should disappear after a while. Air the
room well during this process.
Note:
Baking selector (K1) and temperature selector (K2) pop-up upon pressing so that it is possible to cont-
rol the appliance. If you want to prevent accidental changing of settings during baking or after the baking is
finished, fix them in the inserted position by pushing down to stop.
Daytime setting
1. After connecting the appliance to the mains, the symbol 0:00 will appear on the display.
2. Press button (2) to activate the mode of setting the time of day (the hour position starts blinking).
3. Turn the selector (K2) to set the time in hours (in the range 0 to 23).
4. Upon pressing button (2) the numbers start blinking.
5. Turn the selector (K2) to set the time in minutes (in the range 0 to 59).
6. Press button (2) to end the setting of the time of day. The symbol „:“ starts blinking. This activates the
time and it is shown on the display.
Daytime setting change
1. Push the button (2) in the standby mode. It will activate the daytime setting (clock digit will start
blinking).
2. Turn the selector (K2) to set the time in hours (in the range 0 to 23).
3. Upon pressing button (2) the numbers start blinking.
4. Turn the selector (K2) to set the time in minutes (in the range 0 to 59).
5. Press button (2) to end the setting of the time of day. Symbol „:“ will blink.
This activates the time and it is shown on the display.
EN
74
ETV7460bc
