![Concept2 ETV2860 Скачать руководство пользователя страница 47](http://html1.mh-extra.com/html/concept2/etv2860/etv2860_manual_2650608047.webp)
EN
45
ETV2860
3. Unscrew the rail fixing screws (Fig. 7), move the rails in the required position and fix them back using the fixing
screws.
4. Fix the side racks back on the internal sides of the oven.
f) Cooling fan
The fan is located on the upper side of the oven and provides the circulation of cool air in the furniture. The
fan switches on automatically when the oven is switched on. When the oven is switched off, the cooling fan is
deactivated after about 15 minutes.
CLEANING AND MAINTENANCE
For the sake of good appearance and reliability, keep the unit clean.
The modern design of the unit facilitates the maintenance to the minimum.
The parts of the unit which come into contact with food have to be cleaned regularly.
• Before any maintenance and cleaning, disconnect the power cord from the mains or switch off the circuit
breaker of the mains outlet of the unit.
• Set all controls in the OFF position.
• Wait until the inside of the unit is not hot anymore but remains lukewarm – cleaning is easier than when it is
cold.
• Clean the outer surface of the unit with a damp cloth, soft brush or fine sponge and then wipe it dry.
•
The unit is equipped with catalytic panels on the internal sides of the oven (panels have a light colour).
The surface of the panels is covered with special microporous enamel which absorbs splattering grease and fat
during baking. Their service life is approximately 4 - 6 years (depending on the use of the oven). If you want to
When putting in or taking out the baking pans proceed with caution and make sure the pans do not slide down
from the rails.
It is possible to use the telescopic rails in heights No. 1, 2, 4 and 5. To change the height of telescopic rails follow
these steps:
1. Remove the baking pans and grill from the oven.
2. Unscrew the crews on the internal sides of the oven (Fig. 6) and remove the side racks.
Fig. 7
Fig. 6