Concept2 ETV 5161, Руководство пользователя

Страница: 49 / 70

• The electrical safety of the unit can only be guaranteed
if the protective terminal of the unit is connected to
the protective conductor of the mains.
• The manufacturer bears no responsibility for damage
caused to people or objects as a result of a missing or
bad protective connection.
• The power cord must be located so that it does not
come into contact with hot parts of the unit and so
that it is not deformed or excessively bent.
Follow the installation instructions:
1. Remove all the covering and marketing materials from
the unit before the fi rst use.
2. For the required built-in box dimensions see Fig. 7a. 7b.
For the sake of effi cient air circulation the unit has to be
located according to the dimensions on the pictures
and the design of the cabinet must enable air fl ow into
its bottom part.
3. Put the unit on the edge of the cabinet and run the
power cord through the rear wall of the cabinet so that
its plug is accessible after installation.
4. Push the unit carefully to the selected place in the
cabinet. Be careful not to squeeze the power cord.
5. Attach the unit to the cabinet by screwing 2 screws in
the holes in the side walls of the unit. The holes can
be seen after opening the door.
6. Plug the supply cable into the wall outlet.
Removal
To uninstall the unit, it is important to proceed correctly:
1. First, unplug the power cord from the mains (pull out the plug or switch off the circuit breaker).
2. Remove the attachment screws.
3. Slide out the unit and at the same time pull out the power cord carefully.
Fig. 7a
47 ETV 5161
EN