Concept2 8595631005545, Руководство пользователя

Страница: 57 / 64

57
LA7791ss / LA7791ds
EN
Display
The display lights for some time, when the appliance is connected to the mains. After that the display will witch
to the operating mode. In normal operating mode, the current temperature inside the refrigerator are displayed.
A temperature of 5 °C inside the refrigerator, a temperature of 0 °C inside the variable zone and of -18 °C inside of the
freezer is set as default.
If the door does not get open opened and any other activity is not done within 20 seconds, the control panel gets
locked and goes out. The display lights up again when any of the buttons on the control panel is pressed or the door
is opened.
TIPS FOR USE
• We do not recommend putting hot food or fluids that are still evaporating inside the refrigerator. It will increase the
humidity inside the refrigerator.
•
Food intended for refrigerating should be wrapped or covered. It is recommended to use plastic bags, kitchen foil
or food paper to wrap food. Liquids should be stored in closed containers or bottles.
• It is also not recommended to put beverages in glass bottles in the freezer, glass can easily rupture due to low
temperatures inside the freezer.
Please follow the instructions below to avoid degrading of stored food.
• Do not open the refrigerator door for longer than necessary, as the supply of warm air significantly increases the
temperature inside the appliance.
• Clean surfaces that may be in contact with food and drainage channels regularly.
•
Fresh meat and fish should be stored in a suitable place to avoid contact with other foods.
USER MANUAL
Before first use
Before first use you should wipe the outside and inside of the appliance with a damp cloth for hygiene reasons. Wash
all removable parts with warm soapy water.
After installing the refrigerator, leave the appliance standstill for at least 4–6 hours before connecting to the mains. It
is necessary to allow the cooling gases to set down. Then you can connect the refrigerator to the mains and let it run
for 2-3 hours t o stabilize a normal operating temperature. Then put fresh or frozen food inside the appliance.
Note : If a power failure occurs during the first run, wait for at least 5 minutes before switching on again or connecting
to the mains.
Setting the Temperature of Refrigerator Zone
• After pressing the sensor button to select the temperature zone (8), select the zone, where you want to set the
temperature, in this case the refrigerator. The icon with the selected temperature zone appears on the display.
• Set the desired temperature by pressing the sensor button for setting the temperature (9).
•
Press the sensor button OK (11) to save the setting.
•
The temperature inside the refrigerator can be set between 2 and 8 °C.
Setting the Temperature of the Variable Zone
• After pressing the sensor button to select the temperature zone (8), select the zone, where you want to
set the temperature, in this case the variable zone. The icon with the selected temperature zone appears
on the display.
• Set the desired temperature by pressing the sensor button for setting the temperature (9).
• Press the sensor button OK (11) to save the setting.
• The temperature of the variable zone can be set between -4 and 8 °C.