Concept Seating 3150 Скачать руководство пользователя страница 10

Cleaning Guide

Always pre-test any cleaning method in an inconspicuous or unexposed area.

 We recommend 

purchasing a slipcover if sharing chair with others.  

Alternative Leather

For basic maintenance, clean the whole surface in circular motions using liquid hand soap and water

(1 part soap to 9 parts water). Rinse and wipe with a clean damp white cloth to get rid of any excess

soap. Repeat as needed and then let dry. 

To disinfect with a bleach solution, use 0.5% concentration, which can be prepared as 1 part bleach 

per 10 parts of water. Rinse and wipe with a clean, damp, white cloth to get rid of any excess. Allow 

chair to dry thoroughly. 

DO NOT USE:

  

Solvents like paint thinner, Varsol, acetone, whiteners, waxes, silicones, detergents, 

and/or cleaning products that are not pH neutral. Abrasive cleaning tools such as plastic or wire 

sponges or hard-bristle brushes can permanently damage alternative leather. Never use alcohol. 

Leather

For black leather- Dust with a clean dry cloth for routine cleaning. For spots and spills, wipe excess 

liquid immediately and let air dry. If necessary, use lukewarm water and mild soap, work into a thin 

lather with a soft  cloth, rinse with clean water, and buff to restore luster. A leather cleaner or condi-

tioner may also be used.

For all other colors- Dust with a clean dry cloth for routine cleaning. Wipe the leather with a clean, 

damp cloth to remove soil and allow it to air dry. Leather conditioners and protectants, such as 

those by Leather Master® can be used as directed. Should a spill occur, blot immediately using a 

clean cloth or paper towel. For a more thorough cleaning, a solution of lukewarm water and a mild 

cleaner, such as Ivory® soap or Woolite®, may be used. Dampen a clean white cloth and gently wipe 

the affected area using a circular motion. Rinse completely with a clean cloth to ensure all cleaner 

is removed. Dry with a paper towel or dry cloth and allow to completely air dry. Repeat the cleaning 

process as needed, allowing the leather to dry between applications.

DO NOT USE:

  Bleach, ammonia, or any harsh cleaners.  These types of cleaners eat away at leather 

and the dye. 

Содержание 3150













Отзывы: