AHD CAMERA QUICK START GUIDE
3. CONFIGURING THE CAMERA
Outer Camera Connections
PSU
Power Input
Video Output
- Connect the video output to a video cable running to the recorder/monitor.
- Check the power supply is of the correct level and connect the power supply to the
camera power input.
- View the picture on a monitoring device to check the power and video connection is
properly working.
- To assist in installation when using an analogue test monitor, the camera can be switched
to an analogue output by pushing up on the OSD Button for several seconds.
- The camera can be returned to AHD output by pushing left on the OSD Button for several seconds.
On-Screen Display (OSD Controller)
1. Use the included allen key
accessory to open the service
hatch on the underside of the
camera. The buttons in this hatch
can be used to operate the
camera on-screen display (OSD)
menu and change video format.
2. Press and hold LEFT for 5 seconds to
switch the camera to AHD.
3. Press and hold RIGHT for 5 seconds
to switch the camera to TVI.
4. Press and hold UP for 5 seconds
to switch the camera to CVBS or
Analogue.
5. Press and hold DOWN for 5 seconds
to switch the camera to CVI.
UP
LEFT
RIGHT
DOWN
MENU / ENTER
