AHD CAMERA QUICK START GUIDE
1. WHAT’S IN THE BOX?
1. CONTENTS
Packaging Contents
Technical Documents
4-in-1 AHD Camera x1
Quick Start Guide x1
Fitting Screws x3
Wall Plugs x3
Sunshield x1
Sunshield Bolt x1
Mounting Template x1
Allen Key x1
Analogue SVO Cable x1
2. INSTALLATION
Important: Ensure all precautionary procedures are observed during installation.
It is recommended that the camera is tested in low light and day light conditions
at the point on installation to ensure continuity of effective CCTV monitoring.
1. Open Packaging
Open packaging, remove camera, and set aside the
included accessories. Locate the cable cutout on the
side desired.
2. Drill Mounting Holes
Attach the included mounting template on the
mounting surface and drill holes according to the
template. Insert included wall plugs into the holes.
3. Mount the Camera
Insert cables through the mounting hole.
Position the camera over the mounting holes and use
the included fitting screws to affix the camera to the
mounting surface.
4. Adjust Camera Positioning
Loosen locking screws and axes to move the camera
to the desired monitoring angle. Re-tighten after the
desired angle is found.
2
3
4
1
