3
IMPORTANT SAFETY INSTRUCTIONS
When using your telephone equipment,
basic safety procedures should always
be followed to reduce risk of fire, electric
shock and injury to persons including
the following:
1. Read and understand all instructions.
2. Follow all warnings and instructions
marked on the product.
3. Unplug this product from the wall
outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners.
Use a damp cloth for cleaning.
4. Do not use this product near water,
for example, near a bathtub, washbowl,
kitchen sink, or laundry tub, in a wet
basement or near a swimming pool.
5. Do not place this product on an
unstable cart, stand, or table. The
product may fall causing serious
damage to the product.
6. Slots and openings in the cabinet and
the back or bottom are provided for
ventilation, to protect from overheating.
These openings must not be blocked by
placing the product on the bed, sofa,
rug, or other similar surface. This
product should not be placed in a built-in
installation unless proper ventilation is
provided.
7. This product should be operated only
from the type of power source indicated
on the marking label. If you are not sure
of the type of power supply to your
home, consult your dealer or local
power company.
8. Never push objects of any kind into
this product through cabinet slots as
they may touch dangerous voltage
points or short out parts that could
result in a risk of fire or electric shock.
Never spill liquid of any kind on the
product.
9. To reduce the risk of electric shock,
do not disassemble this product, but
take it to a qualified serviceman when
some service or repair is required.
Opening or removing covers may
expose you to dangerous voltages or
other risks. Incorrect reassembly can
cause electric shock when the
appliance is subsequently used.
10. Unplug this product from the wall
outlet and refer servicing to qualified
service personnel under the following
conditions:
A. When the power cord or plug is
damaged or frayed.
B. If liquid has been spilled into the
product.
C. If the product has been exposed to
rain or water.
D. If the product does not operate
normally by following the operating
instructions. Adjust only those controls
that are covered by the operating
instructions because improper
adjustment of other controls may result
in damage and will often require
extensive work by a qualified
technician to restore the product to
normal operation.
E. If the product has been dropped or
the cabinet has been damaged.
F. If the product exhibits a distinct
change in performance.
11. Avoid using a telephone(other than
