Before setting unit up, carefully read through this
manual to familiarize yourself with the features and
design layout. Then proceed to follow the easy
step-by-step instructions to install and operate.
Your CONAIRPHONE
TM
is designed for use with
telephone systems using modular connections. If
your home or office uses four prong or hard wired
systems, your retailer offers a complete line of
convenient “do it yourself” modular conversion
accessories.
Your telephone is FCC approved for connection to
your telephone line. For future reference, enter
the date code of your unit and the date
purchased in the spaces provided below. You can
find your phone’s date code at the bottom of the
unit.
Date Code:
Date of Purchase:
GET TO KNOW YOUR CONAIRPHONE
1. Receiver
2. Transmitter (Mouthpiece)
3. Heavy Duty Cord
4. Last Number Redial Key
5. Ringer On/Off
6. Mute key
7. Receiver Volume Control ( Norm/High )
8. Universal Compatible Keypad
(tone or pushbutton rotary)
9. Tone or Pulse Switch
10. Durable Plastic Housing
11. Flash Key
12. Telephone Number Insert
Fig. A
IMPORTANT SAFETY INSTRUCTIONS
When using your telephone equipment, basic
safety precautions should always be followed to
reduce the risk of fire, electric shock and injury to
persons, including the following:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on
the product.
3. Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
4. Do not use this product near water, for
example, near a bath tub, wash bowl, kitchen sink,
or laundry tub, in a wet basement, or near a
swimming pool.
5. Do not place this product on an unstable cart,
stand, or table. The product may fall, causing
serious damage to the product.
6. Slots and openings in the cabinet and the back
or bottom are provided for ventilation, to protect it
from overheating. These openings must not be
blocked or covered. The openings should never
be blocked by placing the product on the bed,
sofa, rug, or other similar surface. This product
should never be placed near or over a radiator or
heat register. This product should not be placed in
a built-in installation unless proper ventilation is
provided.
7. Never push objects of any kind into this
product through cabinet slots as they may touch
dangerous voltage points or short out parts that
could result in a risk of fire or electric shock.Never
spill liquid of any kind on the product.
8. To reduce the risk of electric shock, do not
disassemble this product, but take it to a qualified
serviceman when some service or repair work is
required. Opening or removing covers may
expose you to dangerous voltages or other risks.
Incorrect reassembly can cause electric shock
when the appliance is subsequently used.
9. Unplug this product from the wall outlet and
refer servicing to qualified service personnel under
the following conditions:
