TROUBLESHOOTING THE STEAMER
• PROBLEM - Steamer fails to heat
CAUSE - Steamer not plugged in
SOLUTION - Plug into electrical outlet
• PROBLEM - No steam
CAUSE - Water level is low (beep will sound)
SOLUTION - Turn On/Off switch off
and refill water tank
• PROBLEM - Water drips from nozzle
CAUSE - Condensation in hose
SOLUTION - Hold the hose vertically
and allow water to drain back into unit
• PROBLEM - Nozzle gurgles
CAUSE - Condensation in hose
SOLUTION - Hold the hose vertically
and allow water to drain back into unit
• PROBLEM - Poor steam performance
CAUSE - Sediment in tank
SOLUTION - Decalcify reservoir and
water tank. See decalification instructions.
•
PROBLEM - Dye on T-nozzle
CAUSE - Fabric not colorfast / Touching
T-nozzle to fabric
SOLUTION - Move T-nozzle 1/2 inch away
from fabric during use. Clean T-nozzle
with household cleaner and rinse with soap
and water
•
PROBLEM - Discoloring of fabric
CAUSE - Dye on surface of fabric needs
specialty treatment and cleaning / Fabric
not suitable for steaming
SOLUTION - Some custom specialty fabrics
have dyes that are NOT COLORFAST and
are not suitable for steaming. Test fabric
for colorfastness in an inconspicuous spot
before steaming.
NOTE: Amounts of chemicals in water will
vary in different areas. To ensure contin-
ued operation of the steamer, never store
without cleaning and removing excess
water from the reservoir and water tank.
