Comtrend Corporation WAP-EN300C Скачать руководство пользователя страница 99

Страница: 99 / 109

IV-7-3-2.

Date and Time

You can configure the time zone settings of your access point here. The date

and time of the device can be configured manually or can be synchronized

with a time server.

Date and Time Settings

Local Time

Set the access point’s date and time manually

using the drop down menus.

Acquire Current

Time from your PC

Click “Acquire Current Time from Your PC” to

enter the required values automatically

according to your computer’s current time and

date.

NTP Time Server

Use NTP

The access point also supports NTP (Network

Time Protocol) for automatic time and date

setup.

Server Name

Enter the host name or IP address of the time

server if you wish.

Update Interval

Specify a frequency (in hours) for the access

point to update/synchronize with the NTP

server.

Time Zone

Time Zone

Select the time zone of your country/ region. If

your country/region is not listed, please select

another country/region whose time zone is the

same as yours.

Содержание WAP-EN300C














































































































Результаты поиска

Содержание WAP-EN300C

Отзывы:

Comtrend Corporation WAP-EN300C, Руководство пользователя, Страница: 99 / 109

Результаты поиска

Содержание WAP-EN300C

Отзывы: