Comtrend Corporation WAP-EN300C Скачать руководство пользователя страница 105

Страница: 105 / 109

IV-7-4-4.

Factory Default

If the access point malfunctions or is not responding, then it is recommended

that you reboot the device (see

IV-7-4-5.

) or reset the device back to its

factory default settings. You can reset the access point back to its default

settings using this feature if the location of the access point is not convenient

to access the reset button.

Factory Default

Click “Factory Default” to restore settings to

the factory default. A pop-up window will

appear and ask you to confirm.

After resetting to factory defaults, please wait for the access

point to reset and restart.

IV-7-4-5.

Reboot

If the access point malfunctions or is not responding, then it is recommended

that you reboot the device or reset the access point back to its factory default

settings (see

IV-7-4-4

). You can reboot the access point remotely using this

feature.

Reboot

Click “Reboot” to reboot the device. A

countdown will indicate the progress of the

reboot.

Содержание WAP-EN300C














































































































Результаты поиска

Содержание WAP-EN300C

Отзывы:

Comtrend Corporation WAP-EN300C, Руководство пользователя, Страница: 105 / 109

Результаты поиска

Содержание WAP-EN300C

Отзывы: