9
2.3 Device Connection
These steps show how to connect a PowerGrid 9141s-PoE to a network device.
Below we use a PoE camera as a network device.
1.
Plug a PowerGrid 9141s-PoE unit into the power socket closest to the PoE
(IEEE 802.3af compliant) camera or other device. The Power LED on the
PowerGrid 9141s-PoE should light up
GREEN
.
2.
Connect the PowerGrid 9141s-PoE to the camera with an Ethernet cable. The
Ethernet and PoE LEDs on the PowerGrid 9141s-PoE should light up
GREEN
.
3.
The STATUS LED on the PowerGrid 9141s-PoE should now be
RED
,
GREEN
or
ORANGE
.
4.
If the STATUS LED is off, Press the “Config” button on each of the two PowerGrid
9141s and 9141s-PoE devices for 2-5 seconds. Upon successful connection of the
PowerGrid 9141s-PoE, the STATUS LED will light up
GREEN
.
5.
If the connection process is not successful, please refer to the troubleshooting
steps in Chapter 3.
2.4 Adding a New Device
Follow steps 1-4 above to add additional PowerGrid 9141s-PoE devices to the network.
Press the “Config” button on the new device and one other PowerGrid device in the
network so they can pair and transmit data successfully.
