2.2 Front Panel
The front panel LED indicators are shown here and explained in the table below.
They can be used to check the power and connection status of the device.
LED
Color Mode
Function
Green
ON
Power is supplied
POWER
OFF
Power is not supplied
Green
ON
GPON link is established
GPON
Red
ON
GPON link is not established
Blink
Ethernet data transmitting or receiving
ACK
Green
OFF
No data transmitting or receiving
ON
Fast Ethernet LAN Link is established
LAN
Green
OFF
Fast Ethernet LAN Link is not established
ON
Gigabit Ethernet LAN Link is established
GIGABIT
LAN
Green
OFF
Gigabit Ethernet LAN Link is not established
2.3 Default Settings
The default settings are as follows:
•
•
•
•
Local (LAN) access (
username
: root ,
password
: 12345)
LAN IP address: 192.168.1.1
LAN subnet mask: 255.255.255.0
Connection type: Bridge mode
NOTE:
At power on, the device initializes all settings to default values. It then
reads the configuration profile from flash memory and overwrites them.
2.4 IP Configuration
These instructions describe the IP configuration steps for the Ethernet connection of
any computer connected to the CT-402 local area network. Once this connection is
established you will be able to access product features or manage the device using
the web user interface.
NOTE:
These instructions are written for a computer running Microsoft Windows
XP SP2. For different operating systems, the specific steps may vary but
the general procedure is the same. Check the instructions provided with
your OS for further guidance.
6
