Comtrend Corporation ct-5611, Руководство пользователя

Страница: 63 / 80

62
Chapter 7 Diagnostics
The Diagnostics menu provides feedback on the connection status of the Router
and the ADSL link. The individual tests are listed below. If a test displays a fail
status, click
Rerun Diagnostic Tests at the bottom of this page to make sure
the fail status is consistent. If the test continues to fail, click Help and follow the
troubleshooting procedures.
Test Description
Ethernet
Connection Pass: indicates that the Ethernet interface from your computer is
connected to the LAN port of your DSL Router. A flashing or solid
green LAN LED on the router also signifies that an Ethernet
connection is present and that this test is successful.
Fail: Indicates that the DSL Router does not detect the Ethernet
interface on your computer.
USB connection Pass: Indicates that the USB interface from your computer is
connected to the LAN port of your DSL router.
Down: Indicates that the DSL Router does not detect the USB
interface on your computer.
ADSL
Synchronization Pass: Indicates that the DSL modem has detected a DSL signal
from the telephone company. A solid WAN LED on the router
also indicates the detection of a DSL signal from the telephone
company.
Fail: indicates that the DSL modem does not detect a signal from
the telephone company’s DSL network. The WAN LED will
continue to flash green.
ISP Connection
Pass: Indicates we can access the WAN service like the Gateway
and DNS.
Fail: Indicates we cannot access the WAN side.