Comtrend Corporation ct-5611, Руководство пользователя

Страница: 42 / 80

41
The Device Setup page allows the user to configure the LAN interface IP address
and DHCP server. If the user would like this ADSL router to assign dynamic IP
addresses, DNS server and default gateway to other LAN devices, select the radio
box
Enable DHCP server on the LAN to enter the starting IP address and end
IP address and DHCP lease time. This configures the router to automatically
assign IP addresses, default gateway address and DNS server addresses to each
of your PCs.
Note that the router’s default IP address is 192.168.1.1 and the default private
address range provided by the ISP server in the router is 192.168.1.2 through
192.168.1.254.
Note: Ethernet and USB interfaces (and the wireless LAN interface on the Router)
share the same subnet since they are bridged within the router.
If the NAT function is enabled, this DHCP Server Relay won’t be displayed
as an option.
6. After entering your settings, select Next to display the following screen. The
WAN Setup-Summary screen presents the entire configuration summary.
Click
Save/Reboot if the settings are correct. Click Back if you wish to
modify the settings.
The following screen will be displayed.