Comtech EF Data CRS-300 Скачать руководство пользователя страница 200

Страница: 200 / 298

CRS-300 1:10 Redundancy Switch

MN/CRS300.IOM

Front Panel Operation

Revision 19

6–8

front panel. Conversely, when in Remote mode, the unit may be monitored from

the front panel, but configuration parameters may only be changed via the remote

control bus.

6.2.2.1 CONFIG: MANUAL

MANUAL SELECT:
BRIDGE:02 BACKUP:02

You may manually select which Traffic Modem is to be bridged or backed up. In MANUAL mode

(Auto is OFF), both of these selections are available. Use the

◄

►

arrow keys to first select

between BRIDGE or BACKUP. Then, use the

▲

▼

arrow keys to scroll through all active Traffic

Modems – the menu skips over any inactive modem slots. Press [ENT] to continue.

In AUTO mode, the Switch has control and will automatically backup any active Traffic Modem

based on its fault relay activity. The BACKUP selection is unavailable for manual selection, but

the modem being bridged may be changed. In this mode, the MANUAL SELECT display appears

as follows:

MANUAL SELECT:
BRIDGE:02 BACKUP:AUTO

Use the

▲

▼

arrow keys to select an active Traffic Modems – the menu skips over any inactive

modem slots. Press [ENT] to configure.

In BACKUP mode, the Redundant Modem is online. In this case, you may not alter the

bridge/backup state. Instead of the MANUAL SELECT menu, this message displays:

MANUAL SELECT:
SWITCH IS IN AUTO MODE.

Press [CLR] or [ENT] to return to the previous menu.

The Switch learns and retains the configuration of all of the active modems in the setup. The

Switch uses this configuration information to program the Redundant Modem to match the

configuration of the modem being bridged.

6.2.2.2 CONFIG: AUTO (AUTO-OFF or AUTO-ON)

OPERATING MODE:
AUTO-OFF AUTO-ON (ENTER)

Use the

◄

►

arrow keys to select AUTO-OFF or AUTO-ON, and then press [ENT].

When off (MANUAL mode), the Switch does not respond automatically to any modem faults and

simply performs whatever manual setting you perform via the previous MANUAL-SELECT menu.

Содержание CRS-300










































































































































































































































































































Результаты поиска

Содержание CRS-300

Отзывы:

Похожие инструкции для CRS-300

Бренды по названию

Популярные бренды

Comtech EF Data CRS-300, Инструкция по установке и эксплуатации

Результаты поиска

Содержание CRS-300

Отзывы:

Похожие инструкции для CRS-300

Бренды по названию

Популярные бренды