Comtech EF Data CRS-100, Руководство по эксплуатации

Страница: 18 / 38

CRS-100 1:1 Redundancy Switch Revision 2
Introduction MN/CRS100.IOM
2–2
2.3 Configuration
There are only two configuration switches to set, which are located on the left-hand side of the
unit, when viewed from the front. These two switches control the conditions which initiate an
automatic switchover. Consult the following sections on how to set these switches.
2.4 Connect External Cables
Figure 2-1 shows how to connect a pair of modems together with the CRS-100.